Three little keepsakes. Made by you.

Snowflakes Bundle Knitting Pattern

Picture your tree with stars and snowflakes you knitted yourself—then a few more tucked into gifts for people you love. Three sculpted designs, delicate twisted-stitch detail, and a lovely reason to bring those saved yarn remnants out again.

Intermediate
£9.99£20.973-pattern PDF bundle
  • Three distinct designs, each with written instructions, charts and photo guidance
  • From 13 g of 4-ply for an icicle snowflake; 30 g for a star or 3D snowflake
  • Use magic loop or DPNs, with tips for the rounds towards the centre

Instant download after paymentMake them in your own colours
What is included in the bundle?

Three English PDFs, 39 pages in total. Snowflake (14 pages), 3D Snowflake (13 pages) and Star Snowflake (12 pages). Each includes written directions, charts, stitch explanations and photos of the making and finishing.

Is this the right project for me?

Intermediate. These are small, detailed projects for knitters comfortable working in the round. The PDFs describe them as intermediate to advanced.

You will use cables, twisted stitches and centred double decreases, hold stitches on waste yarn and pick them up for the second side. The icicle-edged Snowflake also uses Judy’s Magic Cast-On and bobbles, with photo guidance included.

Materials you will need

Per ornament: icicle-edged Snowflake: 13 g / 47 m of 4-ply with 3.25 mm needles, or 29 g / 58 m of 8-ply/DK with 4 mm needles. 3D Snowflake and Star: 30 g / 108 m of 4-ply each, with 3.25 mm needles.

You will also need stitch markers, two small cable needles or suitable holding markers, a tapestry needle, waste yarn, stuffing and ribbon. The full checklist is below.

How big will my ornaments be?

The finished size depends on your yarn, needles, tension and stuffing. The PDFs do not specify one finished diameter for all three designs.

The 4-ply versions use 3.25 mm needles. The icicle-edged Snowflake also includes an 8-ply/DK version on 4 mm needles. Larger yarn and needles make a larger ornament.

Delivery & refunds

Your three PDF patterns are available to download after payment through the order confirmation page and the link sent by email. For download issues, contact us through the contact page.

Read our refund policy for the terms that apply to digital purchases.

Snowflakes Bundle Knitting Pattern

Three patterns. Three different ways to make Christmas yours.

All three are softly stuffed, three-dimensional ornaments. Choose your first design, then make a matching set—or mix the shapes and colours.

Snowflake · the icicle-edged one

Snowflake · the icicle-edged one

Twisted-stitch lines, small cables and bobble-tipped edges. Judy’s Magic Cast-On joins the two sides at the outside edge. Includes both 4-ply and 8-ply/DK yarn options.

14-page PDF · Written rounds, front and back charts, and photo guidance for the cast-on and finishing.

3D Snowflake · the six-pointed one

3D Snowflake · the six-pointed one

Six sculpted points with cabled twists and raised stitch detail. Choose a hidden side edge for more defined points, or a visible edge for a softer outline.

13-page PDF · Written instructions, two charts, setup photos and notes on choosing your edge finish.

Star Snowflake · the five-pointed one

Star Snowflake · the five-pointed one

A five-pointed star with twisted-stitch texture on both faces. It includes the same hidden or visible side-edge choice, so you can decide which shape you prefer before casting on.

12-page PDF · Written instructions, two charts and photos from setup to the final closure.

Snowflakes Bundle Knitting Pattern

On the tree. On a gift. Made by you.

The little decorations you will recognise every Christmas.

Hang a trio together, tie one onto a wrapped present, or make a different colour for each person you are knitting for. The shapes belong together without every ornament looking the same.

The raised cables and twisted stitches give the fabric its detail. Stuffing gives each ornament its depth, and a ribbon loop finishes it ready to hang.

Small projects, with the tricky parts shown.

A short round can still ask for careful knitting. The PDFs give the setup and finishing the space they need.

Read the rounds or follow the charts

Each design includes written directions and a chart for each face. Stitch definitions explain the cables, twists and decreases used in that pattern.

Photos where the construction changes

See how to hold stitches for the reverse side, return them to the needles, add the hanger and stuff the points. The icicle-edged Snowflake has a separate Judy’s Magic Cast-On photo tutorial.

Notes for the close-to-centre rounds

As the circle gets smaller, the work becomes more fiddly. The instructions explain marker movements around the centred decreases and discuss magic loop versus DPNs.

Snowflakes Bundle Knitting Pattern

A different kind of little knitting project

From the outside edge to the centre. Then the other side.

Start around the ornament’s outside edge and hold one set of stitches on waste yarn. Work the first face in the round, decreasing towards the middle; then return to the held stitches to knit the reverse face.

Before closing the final opening, add the ribbon and stuffing. The two faces share their starting edge, with just the small centre opening to secure at the finish.

Plan your yarn for each design.

These are the PDF quantities for one ornament, using the specified Bendigo Woollen Mills yarn. Substitutions and changes in size can change the amount needed.

Icicle-edged Snowflake

4-ply/fingering: 13 g / 47 m (52 yd), 3.25 mm / US 3 needles.

8-ply/DK: 29 g / 58 m (64 yd), 4 mm / US 6 needles.

The pattern specifies Bendigo Woollen Mills Luxury, with Classic also mentioned for the DK option.

3D Snowflake

4-ply: 30 g / 108 m (118 yd) of Bendigo Woollen Mills Luxury.

Needles: 3.25 mm / US 3. Use a 60 cm circular for magic loop, or a circular plus seven matching DPNs as listed in the PDF.

Star Snowflake

4-ply: 30 g / 108 m (118 yd) of Bendigo Woollen Mills Luxury.

Needles: 3.25 mm / US 3. Use a 60 cm circular for magic loop, or a circular plus six matching DPNs as listed in the PDF.

Snowflakes Bundle Knitting Pattern

Small amounts. Plenty of character.

Give the yarn you have been saving a place on the tree.

A partial ball does not have to wait for another full-sized project. Weigh it and check its length against the design you want to make, then choose a needle size and fabric you like.

The PDFs suggest using yarn remnants as stuffing too. Keep the filling close in colour to the knitted fabric, and add small amounts into the points first so the shape stays defined.

The finishing basket: a few small things to gather.

Markers & holding tools

Six stitch markers for either snowflake; five for the star. Two small cable needles, or two additional suitable stitch markers for holding cable stitches.

A tapestry needle and waste yarn at least 40 cm long are used to hold and return the second-side stitches.

Stuffing & hanging ribbon

A handful of your chosen stuffing—fibre filling, yarn remnants or soft fabric offcuts are among the PDF options.

Allow approximately 20 cm of ribbon, no wider than 5 mm, for each hanging loop. Insert it before filling and closing the ornament.

Gauge & finished size

4-ply: 30 stitches × 37 rows = 10 × 10 cm in stockinette.

Icicle Snowflake in DK: 22 stitches × 20 rows = 10 × 10 cm, as printed in that PDF.

No single finished diameter is specified. Yarn weight, needle size, tension and stuffing all affect the final size.

Before your first ornament

A few things before you begin

Choose your design, check your yarn, and know what the construction asks of you.

Ask us a question
Are these three separate patterns?

Three English PDFs, 39 pages in total. Snowflake (14 pages), 3D Snowflake (13 pages) and Star Snowflake (12 pages). Each includes written directions, charts, stitch explanations and photos of the making and finishing.

Could this be my first knitting project?

These are better suited to intermediate knitters with confident small-circumference knitting skills. You will work cables and twisted stitches, centred decreases and held stitches, with marker changes as the rounds shrink.

The PDFs provide photo guidance, but they are not basic learn-to-knit lessons. Read the technique notes before casting on.

Do I have to use double-pointed needles?

No. All three PDFs discuss magic loop and DPNs. You can use the method you are comfortable with, or combine them. The designer notes that magic loop can be more manageable as the rounds get small.

Can I use the leftover yarn I already have?

Yes, if you have enough for the design and it makes a suitable fabric. Check the quantities above: the icicle-edged Snowflake uses less yarn than the other two.

Different yarns, needle sizes and tension change the size and yarn requirement. The PDFs suggest larger yarn and needles for larger versions; the icicle pattern gives a specific DK option.

What does hidden or visible side edge mean?

For the 3D Snowflake and Star, the setup gives you two choices: a hidden side edge for sharper-looking points or a visible edge for a softer outline. Photos compare both before you choose.

The icicle-edged Snowflake uses Judy’s Magic Cast-On instead, with a photo tutorial for that construction.

Do I need to stitch the two faces together?

The faces begin from a shared outer edge. After the first face is finished, pick up the held stitches and knit the second face. Add the hanger and stuffing, then draw together and secure the small centre opening.

How will I receive the three PDFs?

Your three PDF patterns are available to download after payment through the order confirmation page and the link sent by email. For download issues, contact us through the contact page.

Read our refund policy for the terms that apply to digital purchases.

Your handmade Christmas starts with one

Choose the first ornament you will hang.

An icicle-edged snowflake, a sculpted six-pointed snowflake, or a textured star. All three patterns are ready for your yarn and your own Christmas colours.

Three English PDF knitting patterns · Instant download after payment